The Ryanteck RPi Motor Controller Board is a simple to use & budget friendly motor controller board for the Raspberry Pi. It then allows you to easily control 2 motors in both directions with some simple coding. Now version 3! All boards are pre-soldered.
The SnowPi is the ideal Raspberry Pi Add-on this Winter B Grade Edition, PCB may have slight cosmetic defect however will still work. These are also available only as a kit. If you wish to buy a soldered Snowman see our normal listing here.
This is a 4-port USB hub for Raspberry Pi Zero, and it can be mounted to Raspberry Pi Zero back-to-back. The 4 pogo pins on the back will connect the PP1, PP6, PP22 and PP23 testing pads on Raspberry Pi Zero, hence no soldering will be needed. Please Read The Description Re Zero 1.3
Adafruits clearly labelled breakout for all of the Model B+'s 40 GPIO pins. This is the assembled version of the Pi T-Cobbler Plus. It only works with the Raspberry Pi 2/ 3 / Model B+/ A+ & Zero!
Need to detach or debug your HAT? Then the Mini Black HAT Hack3r is for you!
We've taken the ESP8266 (ESP-12F) module and added the necessary circuitry to allow it to interface cleanly with the Raspberry Pi via serial communication.
Picon Zero is an Intelligent robotics controller for your Raspberry Pi based mobile robot. A built-in processor handles all the direct communication with your input and output devices, leaving you to worry about the overall control with your Raspberry Pi program.