The Ryanteck Budget Robotics Kit is designed to be an easy to use Raspberry Pi roboti kit designed to help teach programming in a fun and easy way. We are aiming to do this with documentation detailing how to build each part, program and use the robot all for no extra cost.
3 Item Items
Warning: Last items in stock!
The kit comes in different options depending on what you select and can also require other parts brought separately.
All kits come with the following:
USB Wi-Fi Adapter:
All of our tutorials use Wi-Fi to program and control the robot. You can either choose to have one added in with the Robot kit or you may use your own.
Our tutorials for setting up Wi-Fi with other adapters should work but we may not be able to provide support.
If you choose to not have the product soldered you will require to solder 2 wires to each motor and solder up the motor controller board.
The motor controller board is of an average difficulty to solder up. Most components are simple and while the stacking header may look hard most people find it slightly easier to solder than an non stacking header.
If you prefer to have it pre-soldered then you can select this option.
Computer to control with:
Most of our tutorials also program the robot using another computer. This can normally be any type of Laptop, Computer or another Raspberry Pi.
You can even program it from most Android Tablets & iPads.
Finally you will require a Raspberry Pi with your robot. This can either be your main Raspberry Pi or another one. The kit is compatible with Models A, B, A+ & B+
If you want another Raspberry Pi you can also get an A+ for a discounted rate with the kit.
Other Handy Bits:
For assembly you require a small flathead screwdriver, a normal sized Phillips screwdriver & some blue tack or cable ties depending on what model Pi & weather you wish to keep it stuck down to the robot or not.
The Ryanteck RPi Motor Controller Board is a simple to use & budget friendly motor controller board for the Raspberry Pi. It then allows you to easily control 2 motors in both directions with some simple coding. Now version 3! All boards are pre-soldered.
Lotsa wires, ideal for prototyping.