In this tutorial we'll connect up the SnowPi RGB to the micro:bit and getting it to light up. Hardware Assembly First we need to connect the SnowPi RGB to the micro:bit using the included micro:bit adaptor. In your package you should have one SnowPi RGB board, micro:bit adaptor, and 3-5 M3 Screws & Nuts If you have 5 screws then you can screw all 5 through, if you have less then only the 3 most right are required. On the micro:bit V2 you may only be able to use the 3 as shown due to new…

Read More